Welcome to ACME !
edison@acme-rp.com 18925288968
Products Home > Injection Mold > Infant Incubator Medical Devices Prototype
All Die Casting CNC Machining Injection Mold 3D Printing Turning Lathe Machining Silicone Rubber Sheet Metal Cutting Injection Mold Product
Infant Incubator Medical Devices Prototype

Infant Incubator Medical Devices Prototype

Function: Infant Incubator
Group: Children
Environment Relative Humidity: 5%~99%
Air Temperature: 20~37
Theory: Electrotherapeutics
LCD Display: Without LCD Display
Power Input: <=400va
Environment Air Velocity of Flow: <0.3m/S



  • Product Details
Servo Control Mode: Air temp;
Instant Parameter Displaying: Set temp, air temp, heat power rate;
Audible & Visual Alarms: Power failure, sensor failure, higher/lower temp, air temperature override, fan failure;
Power failure reset memory and self-test function;
Hood with dual slope: 4 hand-ports.
SPECIFICATION
POWER
Model B-800-1E: 110 / 120 Vac, 50Hz / 60Hz
Model B-800-2E: 220 / 240 Vac, 50Hz / 60Hz
Power Input: ≤ 400VA

ALARM
Power Alarm
Power Failure: Activates if primary power to the Incubator fails or the power wire is accidentally disconnected from the wall receptacle.
Fan Alarm
Fan Failure: Activates if Fan motor malfunctions.
Sensor Alarm
Air Sensor Failure: Air Sensor malfunction, refer unit to service.
Deviation Alarm
High Air Temperature: Activated if displayed Air Temperature is 1.5 0C above set point.
Low Air Temperature: Activated if displayed Air Temperature is 2.5
Below set point.
Over Temperature Alarm
Over Air Temperature: Activated when displayed Air Temperature was approach 38 in Air Mode.

Related Products

Home  |   Injection Mold  |   CNC Machining  |   3D Printing  |   Sheet Metal Fabrication  |   About Us  |   Products  |   Service  |   News  |   Contact
Copyright ©Acme Mold Ltd. All Rights Reserved
粤ICP备18077277号-1